Full-wave Barbell Horn® (FBH) for LSP-600 Ultrasonic Processor
Full-wave Barbell Horn® (FBH) for LSP-600 Ultrasonic Processor
LSP-600 ultrasonic processor, sonicator: Flow through mode schematic
Full-wave Barbell Horn® (FBH) for LSP-600 Ultrasonic Processor

Full-wave Barbell Horn® (FBH) for LSP-600 Ultrasonic Processor

Regular price
$2,048.00
Sale price
$2,048.00
Quantity must be 1 or more

This Full-wave Barbell Horn® (FBH) is designed for the LSP-600 ultrasonic processor configured in the batch or flow-through mode and has the output tip diameter of 21 mm. Barbell Horns® amplify ultrasonic amplitudes while maintaining large output tip diameters, which makes it possible to directly scale up high-intensity ultrasonic processes.  

LSP-600 Ultrasonic Processors Unbox & Assembly Instructions (Flow-Through Mode):

Lead time to shipping: 1 week. 

  • Material: Ti6Al4V
  • Tip diameter: 21 mm
  • Maximum amplitude: 115 microns
  • Frequency: 20 (+/- 1) kHz
  • Maximum power: 600 W
  • Processing volume: 100 ml - 1000 ml

Q1. How are Barbell Horns® different from other ultrasonic horns, probes or sonotrodes?

Barbell Horn® Ultrasonic Technology (BHUT) makes it possible to directly scale-up an ultrasonic process without reducing the amplitude (and the resulting cavitation intensity) provided by a horn. This permits obtaining reproducible post-scale-up results, where productivity rates increase by orders of magnitude while the highest finished product quality is maintained. The below video explains it in greater detail:

Q2Are ultrasonic horns consumable parts that need to be replaced? How long does a horn last?

Ultrasonic horns are consumable parts that need to be periodically replaced. On average, a horn should last between 100 and 500 hours of processing. Working with aggressive chemicals (e.g., acids), under challenging physical conditions (e.g., with abrasive particles), at high ultrasonic amplitudes or at elevated pressures, however, can shorten a horn's lifetime significantly. On the other hand, horns used with most organic solvents, oils or waxes generally last much longer.

Q3. Can I use this FBH horn for both batch and flow-through processing with a reactor chamber (flow-cell)?

Yes. This FBH horn is designed for batch-mode processing in a beaker containing 100 - 500 ml of liquid as well as for flow-through processing with a compatible reactor chamber

Q4. Can I use this FBH horn with one of your other systems (BSP-1200 or ISP-3600)?

Yes. This FBH horn is compatible with LSP-600, BSP-1200, and ISP-3600 ultrasonic processors.

More FAQs