This Conventional Horn (CH) is designed for the LSP-600 ultrasonic processor configured in the batch mode and has the output tip diameter of 12.7 mm.
Lead time to shipping: 1 week.
- Material: Ti6Al4V
- Tip diameter: 12.7 mm
- Maximum amplitude: 113 microns
- Frequency: 20 (+/- 1) kHz
- Maximum power: 600 W
- Processing volume: 15 ml - 100 ml
Q1. Can I use this CH horn for flow-through mode processing with a reactor chamber (flow cell)?
No. This CH horn is designed for batch-mode processing in a beaker containing 15 - 100 ml of liquid.
Q2. Can I use this CH horn with one of your other systems (BSP-1200 or ISP-3600)?
Yes. This CH horn is compatible with LSP-600, BSP-1200, and ISP-3600 ultrasonic processors.
Q3. How are your Barbell Horns® different from this CH horn?
Barbell Horn® Ultrasonic Technology (BHUT) makes it possible to directly scale-up an ultrasonic process without reducing the amplitude (and the resulting cavitation intensity) provided by a horn. This permits obtaining reproducible post-scale-up results, where productivity rates increase by orders of magnitude while the highest finished product quality is maintained. The below video explains it in greater detail:
Q4. Are ultrasonic horns consumable parts that need to be replaced? How long does a horn last?
Ultrasonic horns are consumable parts that need to be periodically replaced. On average, a horn should last between 100 and 500 hours of processing. Working with aggressive chemicals (e.g., acids), under challenging physical conditions (e.g., with abrasive particles), at high ultrasonic amplitudes or at elevated pressures, however, can shorten a horn's lifetime significantly. On the other hand, horns used with most organic solvents, oils or waxes generally last much longer.
- choosing a selection results in a full page refresh
- press the space key then arrow keys to make a selection